2024 Nason ful thane 2k urethane single stage mixing ratio

I just got myself all confused and need some clarification. :embarrass Nason Ful-Thane 2K Urethane is a single stage finish but it says 2K in the title, is it just a single stage? Do I have to shoot a clear over it if I’m using a metallic color? The last question is if I use a siphon gun, what tip size and psi works well with it.. San

Additive: FEE: 2-4 oz 495-01™ per RTS gal. Accelerator: 2-4 oz 483-18™ per RTS gal. Viscosity: 20-21 seconds in a Zahn #2 cup: Pot Life: 4 hours at 70°FSpraying a single stage metallic is not fun with any paint.Make sure you have enough air pressure,even spray pattern,and you need to make dead even passes to have the proper metallic layout.Nason is a great paint IMO.I would bet money its the same as the higher end or discontinued Dupont products in a different can.I would use a base/clear system for any metallic paint.Show's how to do a complete automotive paint job using inexpensive materials such as old school lacquer primer from Auto Body Master and Nason Ful-Cryl II Ac...Reference page for Mixing Nason Automotive Topcoats and Undercoats. For those that use Nason Automotive Paint Products, having a mixing chart is a must. The below charts, include both topcoats and undercoat products. Topcoats being your colors in singles stage to base-coats, as well as your clears. Undercoats are your primers and sealers. Parts by Volume. IF Quality. 8. 483-00™. 1/2. 441-2X. 4. Viscosity. 20-21 seconds in a Zahn #2 cup.Application. Solid colors: Apply 1 medium wet coat, flash to tack, apply 1 full wet coat. Metallic colors: Apply 2 medium-wet coats. Allow to flash 5-10 minutes between coats. Apply a third and final “mist” coat to even the metallic.Product Details Packaging Information MSDS Technical Data Sheet Description A National Rule compliant, urethane single stage topcoat designed with superior hardness development for better cycle time, and improved metallic control providing thousands of cleaner, more vibrant colors.Scjarena Discussion starter · Jan 8, 2018. I never used Nason paints before, but I just sprayed a truck with a white single stage Nason “Ful-thane”. I applied two good coats per mixed per instructions. Paint cured up very fast even at about 55-60 degrees with a medium temp reducer. It had slight orange peel, which bugged me, so I took some ...In this video I finish up a series of door repair videos by painting the repaired panel using Nason Ful-Cryl II Single Stage Acrylic Enamel. Nason Ful-Thane ...Ful-Base® 430-XX Tints Ful-Thane® 435-91™ 2K Urethane Binder Ful-Thane® 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp) Ful-Base® 441-21™ Reducer (Mid-Temp) Ful-Base® 441-22™ Reducer (High-Temp) MIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane ...Thane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors. The products referenced herein may not be sold in your market. Please consult your distributor for product availability. MIXING COMPONENTS Ful-Thane® 401-20™ 2K Urethane Integrated Clear Ful-Thane® 2K 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp)A National Rule compliant, urethane single stage topcoat that is easy to apply and provides outstanding durability for a variety of applications. Ful-Thane 2K Urethane is Nason Finishes premium single stage paint designed for long-term gloss, durability, UV protection and overall performance. Ful-Thane 2K Urethane is our best single stage offering.one thing to keep in mind is the finish may dull out in a month after the initial cut/buff. nason is pretty easy to wet sand and buff after a month from what i have experienced with it. i noticed that if i do the wet sanding/buffing right after painting, it dulls out in about a month due to the paint curing and shrinking a little. so i prefer to have a vehicle back in a month or so and do it ...Application. Solid colors: Apply 1 medium wet coat, flash to tack, apply 1 full wet coat. Metallic colors: Apply 2 medium-wet coats. Allow to flash 5-10 minutes between coats. Apply a third and final “mist” coat to even the metallic.Item#: NAS 401-20 01. Designed to enhance the depth and color of Ful-Thane® factory packaged colors, Ful-Thane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors. Gallon. Approved customers please Log In or Register for approval.Axalta Nason Fulthane 2K Urethane Gallon Mix. Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Please contact store for the proper price suffix ...A 2.8 lb/gal (340 g/l) VOC compliant, urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors. Features Solventborne Good quality Wide color range Product Details Available Sizes Mixing Instructions Application Instructions ApplicationVolume: 16 Ounce. Fast and easy to apply, Nason (R) Finishes take you from start to beautiful finish with speed and efficiency at a low cost. The system was designed to work together to give you the best results when time and money are limited. Nason (R) undercoats, topcoats and clears deliver Value in a Hurry (TM).To enhance depth of color and provide a custom look, Ful-Thane® 401-20™ 2K Integrated Clear may be used. Mix one quart of catalyzed and reduced Ful-Thane® 401-20™ 2K Integrated Clear with one quart of activated and reduced color. Both are mixed 8:1:2. Do not use Ful-Thane® 401-20™ 2k Integrated Clear as a topcoat clear.Show's how to do a complete automotive paint job using inexpensive materials such as old school lacquer primer from Auto Body Master and Nason Ful-Cryl II Ac...Con el sistema de mezclado de color Nason® Ful-Base® puedes obtener acabados bicapa y monocapa de alta calidad en una maquina de mezclado con la capacidad de crear miles de colores para autos y camiones. • Ful-Base® B/C (Basecoat) 3.5 VOC • Ful-Thane® 2K Urethane 2.8 VOC Single-Stage • Ful-Base® B/C (Primario) (3.5 COV)Reference page for Mixing Nason Automotive Topcoats and Undercoats. For those that use Nason Automotive Paint Products, having a mixing chart is a must. The below charts, include both topcoats and undercoat products. Topcoats being your colors in singles stage to base-coats, as well as your clears. Undercoats are your primers and sealers.US :ENGLISH Ful-Thane 2K 2K Urethane Activator 483-15 Section 4. First aid measures Wash out mouth with water. Remove dentures if any. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomitingDuPont Top Coat Nason® Ful-Thane® 2K IB Quality Single-Stage Topcoat FUL-THANE® 2K URETHANE Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Download tech data.Axalta Nason FulCryl II Acrylic Enamel Gallon Mix Item#: NAS ID 01. An acrylic enamel single-stage topcoat that provides very good gloss, chip resistance and durability for excellent performance characteristics. Please contact store for the proper price suffix for your color. Stock or paint code text may be added in the cart.Year old Nason Ful-Thane cut and buff. I have a car that was sprayed last September with Nason Ful-Thane single stage urethane (solid color). It has been stored inside since being painted. The paint job came out glassy smooth but I have some dirt and dust nibs in the paint. My question is what grit should I sand it with to remove the nibs.Approved customers please Log In or Register for approval. Axalta Nason Ful-Base Reducer 441-21 Medium Quart. Item#: NAS 441-21 -4. Reducer for Nason topcoats and urethane primers. Approved customers please Log In or Register for approval. Axalta Nason Fulthane Activator 1/2 Pint. Item#: NAS 483-15 -6.Reference page for Mixing Nason Automotive Topcoats and Undercoats. For those that use Nason Automotive Paint Products, having a mixing chart is a must. The below charts, include both topcoats and undercoat products. Topcoats being your colors in singles stage to base-coats, as well as your clears. Undercoats are your primers and sealers. SelectPrime™ 483-87™ 2K Activator (Mid-Temp) SelectPrime™ 483-88™ 2K Activator (Hi-Temp) MIX RATIO Combine the components by volume (4:1). Mix thoroughly prior to activation. Component Volume SelectPrime™ 421-17™ / 421-19™ 2K Urethane Primer 4 SelectPrime™ 483-88™ / 483-87™ 2K Activator 1 TINTABILITY Not recommended POT LIFEParts by Volume. IF Quality. 8. 483-00™. 1/2. 441-2X. 4. Viscosity. 20-21 seconds in a Zahn #2 cup.CODE DESCRIPTION REMARKS MIX RATIO HARDENER REDUCER MAX APPLIED VOC (LE) IB Quality Ful-Thane® 2K Single Stage Topcoat 8:1:2 483-15™ 441-2X 5.0 lb/gal IC Quality Ful-Base® Single Stage Topcoat 8:1:2 483-08™ 441-2X 5.0 lb/gal ID Quality Ful-Cryl® II Single Stage Topcoat 8:1:2 483-11™ 441-2X 5.0 lb/galA National Rule compliant, urethane single stage topcoat that is easy to apply and provides outstanding durability for a variety of applications. Ful-Thane 2K Urethane is Nason Finishes premium single stage paint designed for long-term gloss, durability, UV protection and overall performance. Ful-Thane 2K Urethane is our best single stage offering.I just got myself all confused and need some clarification. :embarrass Nason Ful-Thane 2K Urethane is a single stage finish but it says 2K in the title, is it just a single stage? Do I have to shoot a clear over it if I’m using a metallic color? The last question is if I use a siphon gun, what tip size and psi works well with it.Single Stage Topcoat ; Thinner ; ... FUL-THANE URETHANE SS BINDER "IS" 2.8 Gallon. ... SELECTSEAL 2K URETHANE SEALER - BLACK Gallon. Item #: 422-52 01.Oct 23, 2013 · 8-1-2 ratio is for Nason Ful-Thane single stage . Check the label on the can of color for the correct ratio and hardener numbers . If the lower door is your only problem why not just respray the door to the side mldg just above the handle . Axalta Nason Fulthane 2K Urethane Quart Mix. Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Please contact store for the proper price suffix for ...But at $840 for gallon of paint, hardener, and reducer, I decided to give Ful-thane a go. I picked up a gallon of Ful-Thane, hardener, reducer, quart of clear, and hardener, for $433.16. Cheap enough. I got the cab ready for paint yesterday. This morning, conditions are absoloutely perfect for painting.Axalta Nason Fulthane 2K Urethane Pint Mix. Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Please contact store for the proper price suffix for ...Axalta nason 2k integrated clear 401 20. Vht paint 70312 views. 8 1 2 ratio is for nason ful thane single stage. Designed to enhance the depth and color of ful thane factory packaged colors ful thane 2k urethane single stage colors and ful cryl ii mix colors. Nason paint color chart. How to mix nason car paint by contributor. Visit the post for ...item 3 Nason SelectClear 258-00 2K activator 258-08 Urethane Multi-Panel Clearcoat Kit Nason SelectClear 258-00 2K activator 258-08 Urethane Multi-Panel Clearcoat Kit $130.00 Free shippingFul-Base® 430-XX Tints Ful-Thane® 435-91™ 2K Urethane Binder Ful-Thane® 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp) Ful-Base® 441-21™ Reducer (Mid-Temp) Ful-Base® 441-22™ Reducer (High-Temp) MIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane ...Dupont / Nason, Urethane Full Thane 2K Urethane, Single Stage,automotive paint restoration, 1-888-724-6844 Auto Paint Pro, Inc. [email protected] 23/10/2013 · The owner bought the cheapest single stage the paint shop had, Nason Urethane. After shooting we did a light scuff with 1200 to let it gas off for a week.Product Details Packaging Information MSDS Technical Data Sheet Description A National Rule compliant, urethane single stage topcoat designed with superior hardness development for better cycle time, and improved metallic control providing thousands of cleaner, more vibrant colors. Mix Ratio Combine components and mix thoroughly. Three Component System Parts by Volume Nason® FulThane® 2K Topcoat (IB quality) 8 Nason® 483-15™ Activator 1 Nason™ FulBase® Reducer 2 Add 2-4 oz. of Nason® 483-18 Accelerator to activated gallon to decrease tape time by 50%.Thane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors. The products referenced herein may not be sold in your market. Please consult your distributor for product availability. MIXING COMPONENTS Ful-Thane® 401-20™ 2K Urethane Integrated Clear Ful-Thane® 2K 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp)Ful-Thane 2K Low VOC Urethane Single Stage (NIS Quality) may be mixed with VS6200 Matte Base Additive to achieve various levels of desired gloss. For accurate mixing, refer to the matte mix formula in ColorNet® or Color Choice®. ADDITIVES . Fisheye Eliminator . Add 1 - 2 oz (30 ml – 60 ml or 30 – 60 grams) Axalta VS6500 Fisheye Eliminator ...one thing to keep in mind is the finish may dull out in a month after the initial cut/buff. nason is pretty easy to wet sand and buff after a month from what i have experienced with it. i noticed that if i do the wet sanding/buffing right after painting, it dulls out in about a month due to the paint curing and shrinking a little. so i prefer to have a vehicle back in a month or so and do it ...Ful-Thane® 435-91™ 2K Urethane Binder Ful-Thane® 483-15™ 2K Urethane Catalyst Ful-Base® 441-20™ Reducer Fast Ful-Base® 441-21™ Reducer Medium Ful-Base® 441-22™ Reducer Slow Ful-Base® 441-29™ Reducer Super Flow MIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane ...8-1-2 ratio is for Nason Ful-Thane single stage . Check the label on the can of color for the correct ratio and hardener numbers . If the lower door is your only problem why not just respray the door to the side mldg just above the handle .MIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Ful-Thane® 2K Urethane Binder (IB Quality) Ful-Thane® 483-15TM 2K Urethane Activator Ful-Base® 441-20TM / 441-21TM / 441-22TM Reducer Volume 8 ADDITIVES Fisheye EliminatorProduct Details Packaging Information MSDS Technical Data Sheet Description A National Rule compliant, urethane single stage topcoat designed with superior hardness development for better cycle time, and improved metallic control providing thousands of cleaner, more vibrant colors.Spraying a single stage metallic is not fun with any paint.Make sure you have enough air pressure,even spray pattern,and you need to make dead even passes to have the proper metallic layout.Nason is a great paint IMO.I would bet money its the same as the higher end or discontinued Dupont products in a different can.I would use a base/clear system for any metallic paint.CODE DESCRIPTION REMARKS MIX RATIO HARDENER REDUCER MAX APPLIED VOC (LE) IB Quality Ful-Thane® 2K Single Stage Topcoat 8:1:2 483-15™ 441-2X 5.0 lb/gal IC Quality Ful-Base® Single Stage Topcoat 8:1:2 483-08™ 441-2X 5.0 lb/gal ID Quality Ful-Cryl® II Single Stage Topcoat 8:1:2 483-11™ 441-2X 5.0 lb/galParts by Volume. 491-16™. 1. 483-19™. 1. Viscosity. 16-22 seconds in a Zahn #2 cup. Pot Life. 24 hours at 70°F.Item#: NAS 401-20 01. Designed to enhance the depth and color of Ful-Thane® factory packaged colors, Ful-Thane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors. Gallon. Approved customers please Log In or Register for approval.Nason 496-00 SelectClear 2K Urethane Spot Clear. Vendor: Mahopac Auto Paint. $146.99. $123.00. Nason 483-70 Selectclear 2K Activator-Mid-Temp (2.5L) Vendor: Mahopac Auto Paint. $171.99. $140.00. Nason 475-00 SelectClear 2K Urethane High Image Clear.Application. Solid colors: Apply 1 medium wet coat, flash to tack, apply 1 full wet coat. Metallic colors: Apply 2 medium-wet coats. Allow to flash 5-10 minutes between coats. Apply a third and final “mist” coat to even the metallic.MSDS Technical Data Sheet Description A urethane single-stage topcoat that is easy-to-apply and provides outstanding durability for a variety of applications. Features Solventborne Easy to apply Outstanding durability Product Details Available Sizes Mixing Instructions Application Instructions ApplicationA National Rule compliant, urethane single stage topcoat that is easy to apply and provides outstanding durability for a variety of applications. Ful-Thane 2K Urethane is Nason Finishes premium single stage paint designed for long-term gloss, durability, UV protection and overall performance. Ful-Thane 2K Urethane is our best single stage offering.Nason 496-00 SelectClear 2K Urethane Spot Clear. Vendor: Mahopac Auto Paint. $146.99. $123.00. Nason 483-70 Selectclear 2K Activator-Mid-Temp (2.5L) Vendor: Mahopac Auto Paint. $171.99. $140.00. Nason 475-00 SelectClear 2K Urethane High Image Clear.Mixing Tips/Nozzles ... Activator for Nason Ful-Thane 2K Urethane Single Stage Paint. Vendor: Mahopac Auto Paint ...Item#: NAS 400-53 01. Ful-Thane Factory Packaged Colors includes a selection of high volume urethane colors that provide outstanding durability for automobiles, trucks, and commercial vehicles. This remarkable finish provides excellent gloss, chip resistance and ease of application. Approved customers please Log In or Register for approval.Axalta Nason Fulthane 2K Urethane Quart Mix. Item#: NAS IB -4. Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles.Description. A National Rule compliant, Factory Package Snow White urethane single stage topcoat designed with superior hardness development for better cycle time, and improved metallic control providing thousands of cleaner, more vibrant colors. Ful-Thane 2K Urethane is the Nason brand’s premium single-stage paint that is easy to apply and ...Thane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors. The products referenced herein may not be sold in your market. Please consult your distributor for product availability. MIXING COMPONENTS Ful-Thane® 401-20™ 2K Urethane Integrated Clear Ful-Thane® 2K 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp)Re: Is Nason Ful-thane 2K urethane paint good paint? It's getting harder and harder to find good single stage paints any more that can be mixed in the old colors, let alone those that are half-way affordable, since the refinish business has totally gone base/clear.435-90 01 "ful-base" enamel binder 435-91 01 "ful-thane" urethane binder 435-93 01 "ful-thane" fast base coat fixe 435-94 01 "ful-cryl" ii acrylic binder 435-95 01 "ful-thane" 3.5 h/s binder 435-96 01 fastdry m & e acrylic enamel binder 435-98 01 3.5 acrylic enamel binder 435-99 01 "ful-thane" 3.5 voc binder larryDescription. A National Rule compliant, Factory Package Snow White urethane single stage topcoat designed with superior hardness development for better cycle time, and improved metallic control providing thousands of cleaner, more vibrant colors. Ful-Thane 2K Urethane is the Nason brand’s premium single-stage paint that is easy to apply and ...Nason 496-00 SelectClear 2K Urethane Spot Clear. Vendor: Mahopac Auto Paint. $146.99. $123.00. Nason 483-70 Selectclear 2K Activator-Mid-Temp (2.5L) Vendor: Mahopac Auto Paint. $171.99. $140.00. Nason 475-00 SelectClear 2K Urethane High Image Clear.Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Ful-Thane® 2K urethane is also available in Ful-Thane® 400-XX High Volume Factory Packages.To enhance depth of color and provide a custom look, Ful-Thane® 401-20™ 2K Integrated Clear may be used. Mix one quart of catalyzed and reduced Ful-Thane® 401-20™ 2K Integrated Clear with one quart of activated and reduced color. Both are mixed 8:1:2. Do not use Ful-Thane® 401-20™ 2k Integrated Clear as a topcoat clear.Part 401-20-4. 1 qt Paint. Designed to enhance the depth and color of Ful-Thane factory packaged colors, Ful-Thane 2K Urethane single-stage colors and Ful-Cryl II mix colors. Specifications.A catalyzed, dried, 1/4"-thick sample of the Nason Ful-Thane® 2K urethane SS remains incredibly flexible.A 2K urethane, non-sanding, gray sealer designed to provide good application properties, a uniform painting surface and fast nib sanding. It can be applied directly over a variety of substrates, including sanded OEM replacement panels. Features. Grey in color; Good application properties; Fast nib sanding; Product DetailsA National Rule compliant, urethane single stage topcoat that is easy to apply and provides outstanding durability for a variety of applications. Ful-Thane 2K Urethane is Nason Finishes premium single stage paint designed for long-term gloss, durability, UV protection and overall performance. Ful-Thane 2K Urethane is our best single stage offering.Ful-Base® Basecoat IF Quality Color 8 Ful-Base® 483-30™ Basecoat Activator ½ Ful-Base® 441-2X™ Reducers 4 *Do not use 441-29 POT LIFE 4 hours at 70°F (21°C) SPRAY VISCOSITY 20-21 seconds in a Zahn #2 APPLICATION SURFACE PREPARATION Before sanding, remove all traces of oil, wax and grease with Nason® 441-05™ Silicone andI never used Nason paints before, but I just sprayed a truck with a white single stage Nason “Ful-thane”. I applied two good coats per mixed per instructions. Paint cured up very fast even at about 55-60 degrees with a medium temp reducer. It had slight orange peel, which bugged me, so I took some 600 to it the next day.Product Details Packaging Information MSDS Technical Data Sheet Description A National Rule compliant, urethane single stage topcoat designed with superior hardness development for better cycle time, and improved metallic control providing thousands of cleaner, more vibrant colors. Additive: FEE: 2-4 oz 495-01™ per RTS gal. Accelerator: 2-4 oz 483-18™ per RTS gal. Viscosity: 20-21 seconds in a Zahn #2 cup: Pot Life: 4 hours at 70°F18-21 seconds in a Zahn #2 cup. 4 hours at 70°F. Solid colors: Apply 1 medium wet coat, flash to tack, apply 1 full wet coat. Metallic colors: Apply 2 medium-wet coats. Allow to flash 5-10 minutes between coats. Apply a third and final “mist” coat to even the metallic. Refer to the product Technical Data Sheet for complete directions for use.Ful-Thane 2K Low VOC Urethane Single Stage (NIS Quality) may be mixed with VS6200 Matte Base Additive to achieve various levels of desired gloss. For accurate mixing, refer to the matte mix formula in ColorNet® or Color Choice®. ADDITIVES . Fisheye Eliminator . Add 1 - 2 oz (30 ml – 60 ml or 30 – 60 grams) Axalta VS6500 Fisheye Eliminator ...Axalta Nason Fulthane 2K Urethane Pint Mix. Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Please contact store for the proper price suffix for ...Dupont / Nason, Urethane Full Thane 2K Urethane, Single Stage,automotive paint restoration, 1-888-724-6844 Auto Paint Pro, Inc. [email protected] 23/10/2013 · The owner bought the cheapest single stage the paint shop had, Nason Urethane. After shooting we did a light scuff with 1200 to let it gas off for a week.MIX RATIO . Combine the components by volume (4:1:1). Mix thoroughly prior to activation. Component Volume . Ful-Thane 2K Urethane Single Stage Color (NIB Quality) 4 . Axalta VS5300 Urethane Activator 1 . Axalta VS5160 / VS5170 / VS5180 / VS5190 Reducer 1 435-00, 435-01 Ful-Thane Binders VS5300 Urethane Activator VS5160, VS5170, VS5180, VS5190 ...Axalta Nason Fulthane 2K Urethane Gallon Mix. Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Please contact store for the proper price suffix ...

Ful-Thane 2K Low VOC Urethane Single Stage (NIS Quality) may be mixed with VS6200 Matte Base Additive to achieve various levels of desired gloss. For accurate mixing, refer to the matte mix formula in ColorNet® or Color Choice®. ADDITIVES . Fisheye Eliminator . Add 1 - 2 oz (30 ml – 60 ml or 30 – 60 grams) Axalta VS6500 Fisheye Eliminator .... Pf changpercent27s baton rouge

nason ful thane 2k urethane single stage mixing ratio

Product Details Packaging Information MSDS Technical Data Sheet Description A National Rule compliant, urethane single stage topcoat designed with superior hardness development for better cycle time, and improved metallic control providing thousands of cleaner, more vibrant colors.JFG Discussion starter · Feb 25, 2009. Hi! I'm planning to paint my daily car as a practice before going on more serious project. I'm planning to use the Nason Ful-thane 2k urethane (solid black) with maybe a clearcoat Nason 497 (depending on your comments). The car (a small Nissan Sentra 1996 ) is already black so it's gonna be black on black.Mix Ratio Combine components and mix thoroughly. Three Component System Parts by Volume Nason® FulThane® 2K Topcoat (IB quality) 8 Nason® 483-15™ Activator 1 Nason™ FulBase® Reducer 2 Add 2-4 oz. of Nason® 483-18 Accelerator to activated gallon to decrease tape time by 50%.Mixing Tips/Nozzles ... Activator for Nason Ful-Thane 2K Urethane Single Stage Paint. Vendor: Mahopac Auto Paint ...Product Details Packaging Information MSDS Technical Data Sheet Description A National Rule compliant, urethane single stage topcoat designed with superior hardness development for better cycle time, and improved metallic control providing thousands of cleaner, more vibrant colors. Nason Full-Thane lists the ratio as 8:1:2 My mix cups have 8:1:1 Using the '5' scale the distance between the 1:1 is 3/8". Will adding 3/8" mark to the last column give me an 8:1:2 ratio? View attachment 1715764917Axalta Nason FulCryl II Acrylic Enamel Gallon Mix Item#: NAS ID 01. An acrylic enamel single-stage topcoat that provides very good gloss, chip resistance and durability for excellent performance characteristics. Please contact store for the proper price suffix for your color. Stock or paint code text may be added in the cart.Single Stage Topcoat ; Thinner ; ... FUL-THANE URETHANE SS BINDER "IS" 2.8 Gallon. ... SELECTSEAL 2K URETHANE SEALER - BLACK Gallon. Item #: 422-52 01.Con el sistema de mezclado de color Nason® Ful-Base® puedes obtener acabados bicapa y monocapa de alta calidad en una maquina de mezclado con la capacidad de crear miles de colores para autos y camiones. • Ful-Base® B/C (Basecoat) 3.5 VOC • Ful-Thane® 2K Urethane 2.8 VOC Single-Stage • Ful-Base® B/C (Primario) (3.5 COV)Item#: NAS 400-01 01. Ful-Thane® 400-01 Factory Packaged Black provides outstanding durability for automobiles, trucks, and commercial vehicles. This remarkable finish provides excellent gloss, chip resistance and ease of application. To 1 gallon of Ful-Thane® 2K Urethane, add 1 pint of 483-15™ Catalyst. Reduce with 1 quart Ful-Base® 441 ...Detailed Description. Activator; Ful-Base 483-56 Low VOC Activator is used to mix Nason Ful-Thane 2K Urethane Topcoat (IS Quality), a 2.8 lbs/gal (340 g/l) VOC compliant, urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors.CODE DESCRIPTION REMARKS MIX RATIO HARDENER REDUCER MAX APPLIED VOC (LE) IB Quality Ful-Thane® 2K Single Stage Topcoat 8:1:2 483-15™ 441-2X 5.0 lb/gal IC Quality Ful-Base® Single Stage Topcoat 8:1:2 483-08™ 441-2X 5.0 lb/gal ID Quality Ful-Cryl® II Single Stage Topcoat 8:1:2 483-11™ 441-2X 5.0 lb/gal435-90 01 "ful-base" enamel binder 435-91 01 "ful-thane" urethane binder 435-93 01 "ful-thane" fast base coat fixe 435-94 01 "ful-cryl" ii acrylic binder 435-95 01 "ful-thane" 3.5 h/s binder 435-96 01 fastdry m & e acrylic enamel binder 435-98 01 3.5 acrylic enamel binder 435-99 01 "ful-thane" 3.5 voc binder larryAxalta Nason Fulthane 2K Urethane Gallon Mix. Ful-Thane® Urethane, one of the distinct paint qualities in the versatile Ful-Base® Multi-Leg Color System, provides an easy-to-apply, single-stage finish. Ful-Thane® offers outstanding durability for automobiles, trucks and commercial vehicles. Please contact store for the proper price suffix ...Ful-Base® 430-XX Tints Ful-Thane® 435-91™ 2K Urethane Binder Ful-Thane® 483-15™ 2K Urethane Activator Ful-Base® 441-20™ Reducer (Low-Temp) Ful-Base® 441-21™ Reducer (Mid-Temp) Ful-Base® 441-22™ Reducer (High-Temp) MIX RATIO Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Component Volume Ful-Thane ...To enhance depth of color and provide a custom look, Ful-Thane® 401-20™ 2K Integrated Clear may be used. Mix one quart of catalyzed and reduced Ful-Thane® 401-20™ 2K Integrated Clear with one quart of activated and reduced color. Both are mixed 8:1:2. Do not use Ful-Thane® 401-20™ 2k Integrated Clear as a topcoat clear.Item#: NAS 401-20 01. Designed to enhance the depth and color of Ful-Thane® factory packaged colors, Ful-Thane® 2K Urethane single-stage colors and Ful-Cryl® II mix colors. Gallon. Approved customers please Log In or Register for approval.A catalyzed, dried, 1/4"-thick sample of the Nason Ful-Thane® 2K urethane SS remains incredibly flexible.Show's how to do a complete automotive paint job using inexpensive materials such as old school lacquer primer from Auto Body Master and Nason Ful-Cryl II Ac....

Nason ful thane 2k urethane single stage mixing ratio -

Popular Topics